yorkemc.co.uk » EMC Test Equipment »

The Cable Coupling Clamp 01

Quick Links:

The Cable Coupling Clamp (CCC01) has been designed by York EMC Services Ltd to allow measurements to be made on a range of cable types, for the purpose of assessing their coupling and shielding effectiveness properties.

The design is based on the details of the possible launcher arrangement, described in IEC 96-1 Amendment 2 1993-06 section A.5.6 Line Injection Method (frequency domain).

NB: We offer a testing service for cables to both IEC 96-1 and EN 50289-1-6.

Technical Details

Cable Coupling Clamp
Larger image available

The CCC01 comprises:

The cable under test and parts associated with its construction are not supplied. A complete CCC01 assembly is shown to the right.

Plastic cable guides for the cable are supplied; these facilitate the mounting of the cable and positioning of the ferrite rings (not supplied).

The plastic plate is designed to allow cable length settings of 0.3m (EN 50289-1-6) and 0.5m (IEC 96-1).

The launchers are supplied with inserts to allow cable diameters of 2.5mm, 5mm, and 10mm. Corresponding clamps for the cable runs are also supplied.

Applications

Ordering Information

Request a quotation for the CCC 01.

If you wish to request quotations for several products, use our general quotation request form.


Further details can be obtained from:

York EMC Services Ltd
University of York
Heslington
York
YO10 5DD
Tel: +44 (0)1904 434440
Fax: +44(0)1904 434434
E-mail: enquiry@yorkemc.co.uk

Top

Home

Last updated: 2007-Apr-27