broadband noise sources emc rf comb continuous request a quote reference signal - York EMC Services Ltd

+44 (0) 1904 324440 enquiry@yorkemc.co.uk

Request a Quote for Purchasing or Hiring our Test Instrumentation

Home » Test Equipment » Request a quote


Request a quote

Please complete the relevant parts of this form so that we can respond quickly to your requests.

If you are interested in the new HFG02, please fill in details for the HFG01 and make a note in the comments field.

If you prefer, individual quotation request forms are available for specific products: the ARA01, CGE01, CGE02, CGE03, CNE V, CNE V+, CNE VI, YRS01, YRS02, YRS03, HFG01 and CCC01.

* indicates a required field

Your details
Purchasing
Hiring
Active Receive Antenna ARA01KIT01 consisting of:
  • ARA01 Active Receive Antenna
  • DAE01 (antenna elements)
  • CAL08 measurement results of antenna factors, 30 MHz to 1 GHz
  • Alkaline batteries
  • Case

ARA Antenna Factors:

CAL08 measurement results of antenna factors 30 MHz to 1 GHz

ARA Accessories:

Set of 2×DAE01 100 mm dipole antenna elements
Set of 2×DAE02 27 0mm improved low-frequency response dipole antenna elements (30 MHz to 300 MHz optimum sensitivity)
TRA01 Tripod adaptor with ARA01 mounting bracket
Comb Generator Emitters All CGE kits consist of:
  • CGE (01, 02 or 03 comb generator emitter) reference signal source, either conducted or radiated.
  • Standard test results, dependent on the type of source
  • BP01 rechargeable battery pack and charger
  • Manual
  • Hard case

Request a quotation for:

CGE01 Standard Kits: 80 MHz & 100 MHz switchable comb step size

CGE01KIT01 including:
  • CGE01C 80 MHz to 18 GHz comb generator (conducted) with SMA 50 Ω connector for direct output
  • CAL13 Conducted output power test results, 0 GHz to 18 GHz, measured using a spectrum analyser
CGE01KIT02 including:
  • CGE01R 1 GHz to 18 GHz comb generator (radiated) with integral antenna
  • CAL09 Radiated field strength test results, 1 GHz to 18 GHz, measured at 3 m in a FAR using a spectrum analyser
CGE01KIT03 including:
  • CGE01C 80 MHz to 18 GHz comb generator (conducted) with SMA 50 Ω connector for direct output
  • MCN02 detachable monocone antenna (1 GHz to 18 GHz optimum used with CGE01)
  • CAL13 Conducted output power test results, 0 GHz to 18 GHz, measured using a spectrum analyser

CGE01 Special Order Kits: 50 MHz & 80 MHz switchable comb step size

CGE01KIT04 including:
  • CGE01C 50 MHz to 18 GHz comb generator (conducted) with SMA 50 Ω connector for direct output
  • CAL13 Conducted output power test results, 0 GHz to 18 GHz, measured using a spectrum analyser
CGE01KIT05 including:
  • CGE01R 1 GHz to 18 GHz comb generator (radiated) with integral antenna
  • CAL09 Radiated field strength test results, 1 GHz to 18 GHz, measured at 3 m in a FAR using a spectrum analyser
CGE01KIT06 including:
  • CGE01C 50 MHz to 18 GHz comb generator (conducted) with SMA 50 Ω connector for direct output
  • MCN02 detachable monocone antenna (1 GHz to 18 GHz optimum used with CGE01)
  • CAL13 Conducted output power test results, 0 GHz to 18 GHz, measured using a spectrum analyser

CGE02 Standard kits: 250 MHz & 256 MHz comb step size

CGE02KIT01 consisting of:
  • CGE02C 250 MHz to 26 GHz comb generator (conducted) with SMA 50 Ω connector for direct output
  • CAL14 Conducted output power test results, 0 GHz to 26 GHz, measured using a spectrum analyser
CGE02KIT02 consisting of:
  • CGE02R 1 GHz to 26 GHz comb generator (radiated) with integral antenna
  • CAL10 Radiated field strength test results, 1 GHz to 26GHz, measured at 3m in a FAR using a spectrum analyser
CGE02KIT03 consisting of:
  • CGE02C 250 MHz to 26 GHz comb generator (conducted) with SMA 50 Ω connector for direct output
  • MCN02 detachable monocone antenna (1 GHz to 26 GHz optimum used with CGE02)
  • CAL14 Conducted output power test results, 0 GHz to 26 GHz, measured using a spectrum analyser

CGE03 Standard Kit: 900 MHz & 1 GHz switchable comb size

CGE03KIT01 consisting of:
  • CGE03C 900 MHz to 40 GHz comb generator (conducted) with 2.9 mm 50 Ω connector for direct output
  • CAL15 Conducted output power test results, 0 GHz to 40GHz, measured using a spectrum analyser
CGE03KIT02 consisting of:
  • CGE03C 900 MHz to 40 GHz comb generator (conducted) with 2.9 mm 50 Ω connector for direct output
  • MCN02 detachable monocone antenna (1 GHz to 26 GHz optimum used with CGE03)
  • CAL15 Conducted output power test results, 0 GHz to 40 GHz, measured using a spectrum analyser

CGE Accessories:

MCN02: 1 GHz to 26 GHz detachable monocone antenna (for CGE01C, CGE02C, and CGE03C).
BP01: 5V 2AHr battery pack and charger

CGE01 Output Measurements:

CAL09 Radiated field strength test results, 1 GHz to 18 GHz, measured at 3 m in a FAR using a spectrum analyser
CAL13 Conducted output power test results, 0 GHz to 18 GHz, measured using a spectrum analyser

CGE02 Output Measurements:

CAL10 Radiated field strength test results, 1 GHz to 26 GHz, measured at 3 m in a FAR using a spectrum analyser
CAL14 Conducted output power test results, 0 GHz to 26 GHz, measured using a spectrum analyser

CGE03 Output Measurements:

CAL15 Conducted output power test results, 0 GHz to 40 GHz, measured using a spectrum analyser
Comparison Noise Emitters:

All CNE kits consist of:

  • CNE (V, V+ or VI comparison noise emitter) reference signal source
  • Standard test results, dependent on the type of source
  • Alkaline batteries
  • Manual
  • Hard case

Request a quotation for:

CNEVKIT01 consisting of:
  • CNE V 9 kHz to 1 GHz comparison noise emitter
  • TLM01 100 mm top loaded monopole antenna (200 MHz to 1 GHz optimum)
  • CAL03 Conducted output power test results, 9 kHz to 1 GHz, measured using a spectrum analyser
CNEVKIT02 consisting of:
  • CNE V 9 kHz to 1 GHz comparison noise emitter
  • TLM01 100 mm top loaded monopole antenna (200 MHz to 1 GHz optimum
  • TLM02 270 mm top loaded monopole antenna (30 MHz to 300 MHz optimum)
  • LSA03 LISN adaptor with IEC 320 style connector
  • CAL03 Conducted output power test results, 9 kHz to 1 GHz, measured using a spectrum analyser
CNEVKIT03 consisting of:
  • CNE V+ 9 kHz to 3.5 GHz comparison noise emitter
  • TLM01 100 mm top loaded monopole antenna (200 MHz to 1 GHz optimum)
  • CAL01 Conducted output power test results, 9 kHz to 5 GHz, measured using a spectrum analyser
CNEVKIT04 consisting of:
  • CNE V+ 9 kHz to 3.5 GHz comparison noise emitter
  • TLM01 100 mm top loaded monopole antenna (200 MHz to 1 GHz optimum)
  • TLM02 270 mm top loaded monopole antenna (30 MHz to 300 MHz optimum)
  • MCN03 detachable monocone antenna (1 GHz to 3.5 GHz optimum used with CNE V+)
  • LSA03 LISN adaptor with IEC 320 style connector
  • CAL01 Conducted output power test results, 9 kHz to 5 GHz, measured using a spectrum analyser
CNEVIKIT01 consisting of:
  • CNE VI
  • MON03 270 mm monopole antenna (200 MHz to 1 GHz optimum)
  • LSA03 LISN adaptor with IEC 320 style connector
  • CAL20 Conducted output power test results, 0 GHz to 6 GHz, measured using a spectrum analyser
CNEVIKIT02 consisting of:
  • CNEVI
  • MON03 270 mm monopole antenna (200 MHz to 1 GHz optimum)
  • TLM02 270 mm top-loaded monopole antenna (30 MHz to 300 MHz optimum)
  • MCN03 monocone antenna (1 GHz to 6 GHz optimum used with CNE VI)
  • LSA03 LISN adaptor with IEC 320 style connector
  • CAL20 Conducted output power test results, 0 GHz to 6 GHz, measured using a spectrum analyser

CNE V Accessories:

TLM01: 100 mm top-loaded monopole antenna (200 MHz to 1 GHz optimum)
TLM02: 270 mm top-loaded monopole antenna (30 MHz to 300 MHz optimum)
LSA03: LISN adaptor with IEC 320 style connector

CNE V+ Accessories:

TLM01: 100mm top-loaded monopole antenna (200 MHz to 1 GHz optimum)
TLM02: 270 mm top-loaded monopole antenna (30 MHz to 300 MHz optimum)
MCN03: Monocone antenna (1 GHz to 3,5 GHz optimum with CNE V+)
LSA03: LISN adaptor with IEC 320 style connector

CNE VI Accessories:

Antenna

TLM01: 100 mm monopole antenna (200 MHz to 1 GHz optimum)
TLM02: 270 mm top-loaded monopole antenna (30 MHz to 300 MHz optimum)
MON03: 270 mm monopole antenna (200 MHz to 1 GHz optimum)
MON02: Telescopic rod antenna
MCN03: Monocone antenna (1 GHz to 6 GHz optimum with CNEVI)

Adaptors

LSA03: LISN adaptor with IEC 320 style connector
NIA01: ISN adaptor with RJ11/RJ14/RJ25/RJ45 connector

CNE V Output Measurements:

CAL02 Radiated field strength test results, 30 MHz to 1 GHz, measured at 3 m OR 10 m on an OATS using a spectrum analyser or receiver
CAL03 Conducted output power test results, 9 kHz to 1 GHz, measured using a spectrum analyser
CAL04 Radiated field strength test results, 30 MHz to 1 GHz, measured at 3 m AND 10 m on an OATS using a spectrum analyser or receiver
CAL06 Radiated field strength test results, 30 MHz to 1 GHz, measured at 3 m in a FAR using a spectrum analyser or receiver

CNE V+ Output Measurements:

CAL01 Conducted output power test results, 9 kHz to 5 GHz, measured using a spectrum analyser
CAL02 Radiated field strength test results, 30 MHz to 1 GHz, measured at 3 m OR 10 m on an OATS using a spectrum analyser or receiver
CAL04 Radiated field strength test results, 30 MHz to 1 GHz, measured at 3 m AND 10 m on an OATS using a spectrum analyser or receiver
CAL06 Radiated field strength test results, 30 MHz to 1 GHz, measured at 3 m in a FAR using a spectrum analyser or receiver

CNE VI Output Measurements:

CAL02 Radiated field strength test results, 30 MHz to 1 GHz, measured at 3 m OR 10 m on an OATS using a spectrum analyser or receiver
CAL04 Radiated field strength test results, 30 MHz to 1 GHz, measured at 3 m AND 10 m on an OATS using a spectrum analyser or receiver
CAL06 Radiated field strength test results, 30 MHz to 1 GHz, measured at 3 m in a FAR using a spectrum analyser or receiver
CAL07 Radiated field strength test results, 1 GHz to 7 GHz, measured at 3 m in a FAR using a spectrum analyser
CAL20 Conducted output power test results, 0 GHz to 6 GHz, measured using a spectrum analyser
York Reference Source Kits:

All York Reference Source kits consist of:

  • YRS01/YRS02/YRS03 noise/comb reference source with selectable broadband noise and comb output up to 6 GHz
  • Standard test results, dependent on the type of source
  • Manual
  • Hard case

Request a quotation for:

YRS01KIT01 including:
  • YRS01 9 kHz to 1 GHz noise/comb reference source
  • MON03 270 mm monopole antenna (200 MHz to 1 GHz optimum)
  • BP01 rechargeable battery pack and charger
  • CAL16 Conducted output power test results, 9 kHz to 1 GHz, measured using a spectrum analyser, all noise and comb modes
YRS01KIT02 including:
  • YRS01 9 kHz to 1 GHz noise/comb reference source
  • MON03 270 mm monopole antenna (200 MHz to 1 GHz optimum)
  • TLM02 monopole antenna (30 MHz to 300 MHz optimum)
  • LSA03 LISN adaptor with IEC 320 style connector
  • BP01 rechargeable battery pack and charger
  • CAL16 Conducted output power test results, 9 kHz to 1 GHz, measured using a spectrum analyser, noise and comb modes
YRS02KIT01 including:
  • YRS02 multi-mode reference source
  • MON03 270 mm monopole antenna (200 MHz to 1 GHz optimum)
  • Alkaline batteries
  • CAL16 Conducted output power test results, 9 kHz to 1 GHz, measured using a spectrum analyser, all noise and comb modes
YRS02KIT02 including:
  • YRS02 9 kHz to 1 GHz noise/comb reference source
  • MON03 270 mm monopole antenna (200 MHz to 1 GHz optimum)
  • TLM02 monopole antenna (30 MHz to 300 MHz optimum)
  • LSA03 LISN adaptor with IEC 320 style connector
  • Alkaline batteries
  • CAL16 Conducted output power test results, 9 kHz to 1 GHz, measured using a spectrum analyser, all noise and comb modes
YRS03KIT01 including:
  • YRS03 30 MHz to 1 GHz noise/comb reference source
  • MCN03 monocone antenna (1 GHz to 6 GHz optimum with YRS03)
  • CAL19 Conducted output power test results, 30 MHz to 6 GHz, measured using a spectrum analyser, all noise and comb modes
  • Alkaline batteries
A YRS03KIT02 including:
  • YRS03 30 MHz to 1 GHz noise/comb reference source
  • TLM02 monopole antenna (30 MHz to 300 MHz optimum)
  • MON03 200 MHz to 1 GHz (optimum) 270 mm long monopole antenna
  • MCN03 monocone antenna (1 GHz to 6 GHz optimum with YRS03)
  • LSA03 LISN adaptor with IEC 320 style connector
  • CAL19 Conducted output power test results, 30 MHz to 6 GHz, measured using a spectrum analyser, all noise and comb modes
  • Alkaline batteries

YRS01 Accessories:

TLM01: 100 mm top-loaded monopole antenna (200 MHz to 1 GHz optimum)
TLM02: 270 mm top-loaded monopole antenna (30 MHz to 300 MHz optimum)
MON03: 270 mm monopole antenna (200 MHz to 1 GHz optimum)
LSA03: LISN adaptor with IEC 320 style connector
NIA01: ISN adaptor with two data socket outputs (6 way RJ11/RJ14/RJ25 socket & 8 way RJ45 socket)
BP01: 5V 2AHr battery pack and charger

YRS02 Accessories:

TLM01: 100 mm top-loaded monopole antenna (200 MHz to 1 GHz optimum)
TLM02: 270 mm top-loaded monopole antenna (30 MHz to 300 MHz optimum)
MON03: 270 mm monopole antenna (200 MHz to 1 GHz optimum)
NIA01: ISN adaptor with two data socket outputs (6 way RJ11/RJ14/RJ25 socket & 8 way RJ45 socket).

YRS03 Accessories:

TLM01: 100 mm top-loaded monopole antenna (200 MHz to 1 GHz optimum)
TLM02: 270 mm top-loaded monopole antenna (30 MHz to 300 MHz optimum)
MON03: 270 mm monopole antenna (200 MHz to 1 GHz optimum)
MCN03: Monocone antenna (1 GHz to 6 GHz optimum with YRS03 only)
NIA01: ISN adaptor with two data socket outputs (6 way RJ11/RJ14/RJ25 socket & 8 way RJ45 socket)

YRS Combination Kit:

YRS combination kit including:
  • YRS02 comb/noise reference source (9 KHz to 1 GHz)
  • YRS03 comb/noise reference source (30 MHz to 6 GHz)
  • TLM02 270mm long top-loaded monopole antenna (30 MHz to 300 MHz optimum)
  • MON03 270mm long monopole antenna (200 MHz to 1 GHz optimum)
  • MCN03 monocone antenna (1 GHz to 6 GHz optimum)
  • LSA03 LISN adapter with IEC style connector
  • CAL16 Conducted output power test results, 9 kHz to 1 GHz, measured using a spectrum analyser, noise and comb modes (YRS02)
  • CAL19 Conducted output power test results, 30 MHz to 6 GHz, measured using a spectrum analyser, all noise and comb modes (YRS03)

YRS01/YRS02 Output Measurements:

CAL16 Conducted output power test results, 9 kHz to 1 GHz, measured using a spectrum analyser, all noise and comb modes
CAL17 Radiated field strength test results, 30 MHz to 1 GHz, measured at 3 m OR 10 m on an OATS using a spectrum analyser or receiver, all noise and comb modes
CAL18 Radiated field strength test results, 30 MHz to 1 GHz, measured at 3 m in a FAR using a spectrum analyser or receiver, all noise and comb modes

YRS03 Output Measurements:

CAL17 Radiated field strength test results, 30 MHz to 1 GHz, measured at 3 m OR 10 m on an OATS using a spectrum analyser or receiver, all noise and comb modes
CAL18 Radiated field strength test results, 30 MHz to 1 GHz, measured at 3 m in a FAR using a spectrum analyser or receiver, all noise and comb modes
CAL19 Conducted output power test results, 30 MHz to 6 GHz, measured using a spectrum analyser, noise and comb modes
CAL21 Radiated field strength test results, 1 GHz to 6 GHz, measured at 3 m in a FAR using a spectrum analyser, noise, 20 MHz and 40 MHz comb modes
Harmonics and Flicker Generator: HFG01KIT01 consisting of:
  • HFG01 Harmonics and Flicker Generator
  • CAL12 Measurement results of harmonics and flicker generated using a power analyser
  • US and EU mains plug adaptors

HFG01 Output Measurement Results:

CAL12 Measurement results of harmonics and flicker generated using a power analyser
Cable Coupling Clamp: CCC01KIT01 Cable Coupling Clamp kit including:
  • Pair of preassembled cable injection assemblies
  • Base plate with mounting positions for 0.3 m and 0.5 m cable test lengths
  • 2.5 mm, 5 mm and 10 mm diameter cable mounting fittings
  • Additional clip-on ferrite chokes
  • Self-adhesive copper tape (signal injection conductor)
  • Hard case for injection assemblies and accessories

CCC 01 Accessories:

CMF01 Kit of user machinable blank fittings for custom cable apertures (single cable) Special Contact us for information regarding our testing service for cables to both IEC 96-1 and EN 50289-1-6, using CCC01

Comments

Data Protection Act

York EMC Services Ltd may from time to time write to you with information about its products or services, and in order to do so will store the information you give us in either paper or electronic format. Should you NOT wish to receive correspondence from us please tick here

Reset Form

Thank you for your interest in our products.

You may wish to read our privacy and cookies statement.

Request a quote Find your nearest distributor See our locations
Your staff were thoroughly professional and catered for myself and our customer very well during our visit  (Testimonial)
York EMC Services have created a very warm, hospitable environment for visitors (Testimonial)
Their willingness to go the extra mile to help us to achieve our objectives (Testimonial)
The impressive persistence of the staff in resolving issues (Testimonial)
We were particularly impressed with how quickly York EMC Services responded to our request (Testimonial)
Both technical and administrative staff were extremely knowledgeable, helpful and co-operative throughout the testing period. (Testimonial)
From initial visits to several series of testing , York EMC Services at Castleford were the most open and obliging company (Testimonial)
"We really appreciate the great work York EMC is doing for us”  (Testimonial)
“I will remember my visit to Castleford as the day of the eclipse and really enjoyed the demonstrations given by your engineers" (Testimonial)
"I wouldn't have had a clue without the help from York EMC so thank you, I appreciate your help" (Testimonial)
Flexibility and technical expertise appreciated in dealing with real situations (Testimonial)
EMC Design Course was definitely worth my while attending (Testimonial)
Knowledgeable and friendly engineering staff, entirely professional and attentive to our needs (Testimonial)
York EMC Services consistently delivers an excellent service, with useful advice always provided (Testimonial)
The support the engineers offer is fantastic and we really appreciated the great job they do, sometimes at very short notice. (Testimonial)
Training courses where extremely well delivered in a very effective format from experts within their respective fields (Testimonial)
York EMC Services provide us with the Right Service at the Right Price and usually Right Now! (Testimonial)
Despite our demands York EMC consistently provided us with well managed, quality and personable service (Testimonial)
YES did an excellent job in the presentation and demonstration during our In-house EMC Course (Testimonial)
We recently used YES for the first time. Staff were very helpful and supportive (Testimonial)
I appreciated the advice given during and after the testing. I would not hesitate to use YES again.  (Testimonial)
YES understood my project and delivered what was required (Testimonial)
I highly recommend YES to all (Testimonial)
YES are a very supportive, reliable and professional team (Testimonial)
They were interested in our product and helping us pass the testing we required (Testimonial)
I was impressed with the knowledge and depth of expertise of the staff (Testimonial)
Staff are extremely helpful and knowledgeable (Testimonial)

Latest News

Happy 2017 | Planning for Your Future | 10/01/17

An exciting year ahead with a new state-of-... Read article

Electromagnetic Fields (EMF) Site-Surveys | 23/11/16

Professional Electromagnetic Fields (EMF)... Read article